CS1203: Redipress Continuous Switch Strip

A rubberised switch strip enclosed within an aluminium mounting channel, activates an‘Affray Alarm System’, such as CS1202. Available in either a ‘Red’ or 'White (high profile) or ‘Green’ or 'Black' (low profile) and used in conjunction with the ‘Redimon’ monitor CS1204. Used in Police Stations, Magistrates Courts, Crown Courts and Prisons.

• Two versions available, High or Low profile
• Fully Sealed
• Press-at-any-point facillity, finger, hand or foot operation
• Normally open configuration
• Adaptable design
• Simple installation, flexible to follow surface contours
• Long design life
• Aluminium mounting channel
  
  Operation
  
  The REDIPRESS is a normally open momentary switch for applications where 'Press-at-any-point' facilities are needed. Two versions, 'high and low profile', are available, both of which can be fitted in a protective aluminium mounting channel. The low profile version enables a shrouded finger operated switch to be provided for Personal Attack switches for intruder alarms meeting the requirement of BS4737. The high profile version for Affray Alarms or applications where hand or foot operation is preferred.

  Redipress is pre-terminated at one end with a 450mm lead. It is supplied by the meter and can be cut to length and terminated to your requirements. The mounting channel is available in pre-cut lengths. Without the mounting channel Redipress can be formed round a diameter of 60mm and is therefore able to easily follow wall contours without creating unnecessary alarm conditions. It is designed as a low voltage component, if it is necessary to use Redipress on mains voltage then a step down transformer and a suitable relay should be used.
  

• Inner switch: Sprung Steel with a Copper Clad Switch housed in PVC (Red, White, Black and Green).

• 'Low' profile (in Green or Black)
• 'High' profile (in Red or White)