CS1204: Redimon Redipress Monitor

A latching monitor used along with a Redipress Continuous Switch Strip, such as CS1203, and an Affray Alarm System, such as CS1202. Used in Police Stations, Magistrates Courts, Crown Courts, and Prisons.

• Latching Monitor
• 12 Volt DC supply
• LED status indicator. Green / Red / Yellow.

  Operation
  
  REDIMON is a latching monitor unit which fully monitors two lengths of Redipress to give independant alarm and fault conditions. A end of line resistor (6k8) is fitted at the remote ends of Redipress. Pressing the REDIPRESS creates a short circuit which will be detected as an alarm condition. If the REDIPRESS becomes disconnected in any way a fault condition is generated. The REDIMON requires 12 volt dc supply and provides volt free changeover contacts for both alarm and fault. A status LED indicator is provided, this would normally be illuminated as GREEN for system healthy and would change to RED for alarm and YELLOW fault condition.

  Any other type of non-latching open circuit button or switch could be wired across REDIPRESS circuits to compliment the system as in REDIPRESS 1 shown opposite.

• White Plastic

• Non-Available