CSL1405 ADM200 Series Electro-mechanical Slam Action Cell Lock

ADM200 Series Electro-mechanical Slam Action Cell Lock

Purpose

To provide secure locking of swinging cell doors using third party access control systems or conventional key control and where automatic deadlocking is a requirement.

Overview

The ADM200 Series Electro Mechanical Cell locks can be either flush or surface mounted and is of robust construction based on the Custodial Services standard cell lock footprint. The main bolt is automatically extended providing a throw of 32mm and deadlocked on closure of door. The lock has been tested to SS317 – Specification for locks for custodial doors – Part 1, Class 1 mechanical cell locks. Unlocking is achieved by a 24 volt DC input from an external source to energise the internal solenoid. The solenoid, when energised will then lift an internal mechanism to allow the external white lever handle to withdraw the main bolt. Once the door is open and out of the door frame the main bolt will stay retracted until the door is closed into the frame again and the lock is triggered. Manual Override is adopted in the event of a power failure, the lock can be unlocked by using the override key that will mechanically disengage the electrical functions of the lock and allow the external white lever handle to withdraw the main bolt. Mechanical Deadlocking is achieved by the use of a conventional key that will operate an internal inner locking unit that will engage into the main bolt when it is fully extended. When the Mechanical Deadlocking is operational the lock will be fully locked down and unlocking by the electric mode will not be possible. Keys for the Mechanical Deadlocking and the Override functions can be supplied to different combinations or if preferred one key only for both the deadlocking and override functions can be adopted.

Specification

• Lock case is CNC machined from single piece carbon steel for ultimate strength.
• Solid steel main bolt, with solid tungsten anti-cutting rollers and 32mm throw.
• Brass stud release mechanism with centre point activation for reliable slam action operation.
• Ligature resisting Key escutcheon with external visual status indication LED.
• Independent 7-lever internal locking unit with unique lever system and antipick lever dividers.
• One piece stainless steel key design cut in a controlled environment to enhance security.
• 5 bolt security head fixings to prevent unauthorised removal.
• Solid brass escutcheon designed to give positive key alignment.Finish
• Lock case – carbon steel electro-plated and powder coated exterior.
• Main bolt – carbon steel electro-plated.
• Main bolt follower – Solid brass.
• Keys – Stainless Steel.
• Levers and springs – Brass / phosphor Bronze.Options
• Surface or flush mounted.
• A wide range of fixings including backplates, stud fixings, locking plate and keeps available.
• Available in alternative PPC finishes on request.
• Ligature and abuse resisting ergonomic lever handle designed to shear under excessive load to prevent damage to internal locking mechanism.
• Interchangeable mechanical inner locking unit to enable re-coding.Dimensions and Weights
• Case Height 286mm
• Case Length 267mm
• Case Thickness 30mm
• Bolt Throw 32mm
• Bolt Depth 45mm
• Bolt Thickness 22mm
• Weight (surface mounted) 9.05kg
• Weight (flush mounted) 8.45kgNote – The lock is available in left or right hand variants for opening in or opening out doors and can be fitted to steel or wooden doors. A range of backplate stud lengths are available to suit door thicknesses from 25 to 70mm.